|
|
|
|
Adheres to:
tile • aluminum • glass • laminates • drywall • plastic* • marble • vinyl • fiberglass • ceramic • granite • porcelain • painted surfaces
*Except Teflon, polyethylene & polypropylene.
MildewFree's 7 Year Guarantee against mildew growth on the sealant (not on
soap film), isn't the typical "product replacement" only. Not only will we
replace the product, but we will also provide a contractor for re-installation.
MildewFree out performs the competition, and so does our one-of-a-kind warranty.
Maintenance:
As you read
earlier in the Mildew Facts section, mildew grows on surfaces as thin as a
build-up of soap film. If you don't clean off this film, mildew can grow on the
film itself! To avoid this, each time that you scour your tub, use Clean Shower™
or similar products to clean the caulk bead and prevent soap film build-up.
Clean up & Storage:
Clean-up tools and hands with warm water and soap. Leftover MildewFree can be stored by firmly replacing the cap.
Where not to use MildewFree
- Sink drains
- Tub drains
- Swimming pools
| - Hot tubs
- Saunas
- Copper fixtures
|
Warranty
Guaranteed for 7 Years to Prevent Mildew
Growth on the Sealant: If mildew growth occurs
on the sealant (not on soap film), within 7 years
of purchase, Sashco will replace the product and
provide a contractor for re-installation. Proof of
purchase is required. Warranty applies to single
family residential use only. No other warranties
are expressed or implied. Sashco will not be
responsible for consequential damages other than
as stated above.
For additional application tips and information
about other Sashco high performance products,
visit www.sashco.com.
Typical Properties
Packaging/Colors: 6 oz. squeeze tubes, White & Linen
Application Range: 40°-120° F (surface temp.)
Service Range: 0°-250° F
Specifications: Meets FHA requirements. Meets
or exceeds Federal Specification ASTM-C-834
Solids: 77% by weight
Cure time @ (70°F)
Tack free: 30 min
Paintable: (water-base) 4 hours
Paintable: (oil-base) 1 week
Water exposure: 24 hours (min)
Full cure: 4-5 days (dependent on
temperature, humidity & bead size)
Freeze-Thaw Stability:
Passes 10 cycles (0°F to 70°F)
Tensile Properties:
Maximum Stress (psi): 128
Elongation to Break (%): 200
Hardness, Shore A: 55 (21 day cure)
VOC: <4%, 67 g/Liter
Slump (inches): <1/8"
The data reported here are believed to be reliable. No
warranty is made concerning the accuracy of the results
obtained from their use.
|
|
Back to Mildew Free |
|
|
|