 Mor-Flexx™ Won't Re-crack
Have you tried other mortar, stucco and grout repair products that cracked again
because they dried hard and brittle? Mor-Flexx is different - it stretches and 'flexes'
with temperature change and movement yet still has the sandy texture and color of
mortar. You'll get a stretchy seal that lasts for years.
What Does Mor-Flexx Fix?
Use Mor-Flexx to repair interior and exterior cracks or gaps in:
- Mortar
- Stucco (including edging)
- Artificial Stucco
- EIFS (Exterior Insulation Finishing Systems)
- Concrete foundation sidewalls and basement floors
- Grout in tile floors and countertops
- Textured walls and ceilings.
Where NOT To Use Mor-Flexx
- Mor-Flexx should NOT be used on concrete less than 6 months old; the concrete is
not fully cured.
- Mor-Flexx should NOT be used where hydrostatic resistance is wanted (an example
of hydrostatic resistance is sealing a crack in a basement foundation wall that
will be exposed to water and the pressure the water exerts on the joint).
- For the longest lasting seals, Mor-Flexx is not recommended for use on horizontal
surfaces like driveways and sidewalks, or any surfaces that are continually wet.
Physical Specifications
• Surface Application Range:
40°F to 90°F (5°C to 32°C)
• Service Range:
-30°F to 250°F (-34°C to 121°C)
• Elasticity: ±25% of the filled area
Span: Up to 3" (76mm) wide
Gap Coverage Guide (1 Cartridge)
Width Depth Linear Feet
1/4" 3/8"-1/2" 26'-20'
1/2" 3/8"-1/2" 13'-10'
3/4" 3/8"-1/2" 9'-6.5'
1" 3/8"-1/2" 6.5'-5'
Back to Mor-Flexx
|