|
|
|
|
Brush-grade should be applied between 1/8" and 1/4" thick. Make sure it is worked
well onto the surface so good contact is achieved.
Sizes and coverage
• Quart can 32 oz. (.946 liters) - brush grade 1/4" thick - 1.6 ft2,
1/8" thick - 3.2 ft2
• 1 Gallon can (3.78 liters) - brush grade 1/4" thick - 6.4 ft2,
1/8" thick - 12.8 ft2
All sizes come in clear.
How to make a shingle patch invisible.
Trim the hole in the shingle to a uniform size. From a spare shingle,
cut a repair piece that will fit into the uniform hole. Tool or brush Through The
Roof!™ into the hole. Fit the repair piece making sure
it has good contact with the sealant. Brush another coat over the top of the patch
overlapping at least 1" onto the repaired shingle.
If you do not have a spare shingle, simply brush Through The Roof!™
into the hole and overlap the shingle at least 1". Assuming there is additional
roofing material under the hole, you do not need to use extra patching material.
Note: Through The Roof!™ may become discolored when applied
over some asphalt shingles or patching compounds. This does not affect its performance.
|
Sealing chimney and other flashing
Use brushable grade and overlap the steps of the flashing as well as
the brick. Through The Roof!™ can be used to seal over cracks
in mortar, which can be a leak source. Loose mortar should be replaced. The end
result is a much more attractive roof than using black asphalt roof sealants.
|
Repair white roof coatings
Through The Roof!™ can be used to repair cracks
and small holes in white water-based roof coatings - either to add life or to prepare
the surface for an additional application of roof coating. Allow Through The Roof!™
to dry 24 hours before putting on additional roof coating. Unlike asphalt patching
compounds, Through The Roof!™ won�t bleed through coatings
applied over it - because it is clear.
|
Back to Through the Roof Application Guide
|
|
|