• Approximately 100,000 species of mildew exist
  
• Mildew can be nearly any color-black, orange, green or white
  
• Mildew can be transported by insects, animals or air
  
• All mildew require oxygen, water and a food source, e.g., soap film, body oil, construction materials, etc.
  
• Mildew flourishes as the humidity of an environment rises.
  
• The ideal temperature range for mildew growth is 70°-90° F.
  
  

• 7 Year Replacement Warranty*
• Resistant to damage from abrasive cleaners
• Maintains a water-tight seal
• Easy to apply
• Ideal for kitchen & bath applications
• Great for resetting tiles
• Two popular colors-White & Linen
  
  *Guaranteed for 7 Years to prevent mildew growth on the sealant: If mildew growth occurs on the sealant (not on soap film), within 7 years of purchase, Sashco will replace the product and provide a contractor for re-installation. (See data tec for complete warranty).

	1. Remove old caulk, loose grout, etc., especially any pockets of mildew.

	2. If the caulk that you just removed was silicone, you must eliminate all residues or your new sealant will not adhere well. Use a silicone remover such as McKanica® Silicone Caulk Remover*.

	3. Sanitize the area with a household bleach mixture (1:9 bleach to water) to kill any existing mildew. Work the mixture into the joint and scrub well using a brush.

	4. Rinse with clean water and dry thoroughly.

	5. Trim the nozzle at an angle to desired bead size.

	6. Squeeze MildewFree into the joint.

	7. Smooth the bead with a wet foam brush, putty knife or finger.

	8. Clean up with soap and water.Allow a minimum of 24-48 hours before exposure to water.

*McKanica® is a registered trademark of Jakqumar AG Corporation Switzerland, Zug, Switzerland.